feat(im): Add user-owned IM channel connections (#3487)

* Add user-owned IM channel connections

* Fix dev startup and channel connect popup

* Use async channel connect flow

* Harden dev service daemon startup

* Support local IM channel connections

* Align IM connections with local channels

* Fix safe user id digest algorithm

* Address Copilot IM channel feedback

* Address IM channel review comments

* Support all integrated IM channel connections

* Format additional channel connection tests

* Keep unavailable channel connect buttons clickable

* Fix IM channel provider icons

* Add runtime setup for enabled IM channels

* Guard global shortcut key handling

* Keep configured IM channels editable

* Avoid password autofill for channel secrets

* Make channel threads visible to connection owners

* Persist IM runtime config locally

* Allow disconnecting runtime IM channels

* Route no-auth channel sessions to local user

* Use default user for auth-disabled local mode

* Show IM channel source on threads

* Prefill IM channel runtime config

* Reflect IM channel runtime health

* Ignore Feishu message read events

* Ignore Feishu non-content message events

* Let setup wizard enable IM channels

* Fix frontend formatting after merge

* Stabilize backend tests without local config

* Isolate channel runtime config tests

* Address channel connection review comments

* Use sha256 user buckets with legacy migration

* Ensure runtime IM channels are ready after restart

* Persist disconnected IM channel state

* Address channel connection review comments

* Address channel connection review findings

Frontend connect flow:
- Open the runtime-config dialog only when a provider still needs
  credentials; configured providers go straight to the connect flow, so
  the binding-code/deep-link path is reachable from the UI again.
- After saving credentials, continue into the connect flow when a user
  binding is still required (multi-user mode) instead of stopping at a
  "Connected" toast.
- Extract shared provider-state helpers to core/channels/provider-state
  and add unit + e2e coverage for the direct-connect and
  configure-then-connect paths.

Provider status semantics:
- Report connection_status from the user's newest connection row;
  with no binding it is not_connected, except in auth-disabled local
  mode where a configured running channel is effectively connected.

Concurrency and event-loop correctness:
- Offload ChannelRuntimeConfigStore construction and writes, channel
  service construction, and Slack connection replies to threads; add a
  tests/blocking_io/ anchor for the runtime-config handlers.
- Consume binding codes with a conditional UPDATE so a code can only be
  used once under concurrent workers; retry upsert_connection as an
  update when a concurrent insert wins the unique constraint.
- Serialize ensure_channel_ready per channel so concurrent provider
  polls cannot double-start a channel worker.

Config and migration hardening:
- Stop mutating the get_app_config()-cached Telegram provider config;
  the runtime store now owns the UI-entered bot username.
- Register channel_connections in STARTUP_ONLY_FIELDS with the
  standardized startup-only Field description.
- Match the legacy unsafe-id bucket by recomputing its exact SHA-1 name
  so another user's same-prefix bucket can never be migrated.
- Remove the unused Telegram process_webhook_update path and document
  src/core/channels in the frontend docs.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

* Address PR review comments on authz scoping and channel runtime

Security (review feedback from ShenAC-SAC):
- Scope internal-token callers to the connection owner carried in
  X-DeerFlow-Owner-User-Id instead of bypassing owner checks outright,
  in both require_permission(owner_check=True) and the stateless run
  endpoints. Internal callers keep access to their own and
  shared/legacy threads, and may claim a default-owned channel thread
  for its real owner, but a leaked internal token no longer grants
  cross-user thread access.
- Require admin privileges for POST/DELETE /api/channels/{provider}/
  runtime-config: runtime credentials and channel workers are
  instance-wide shared state (same model as the MCP config API).
  Read-only provider listing stays available to all users.

Performance (review feedback from willem-bd):
- Skip the redundant thread channel-metadata PATCH after the first
  successful backfill per thread.
- Reuse the per-connection Slack WebClient until its token changes
  instead of constructing one per outbound message.
- Reconcile channel readiness for all providers concurrently in
  GET /api/channels/providers.

Also resolve the code-quality unused-import flag in the blocking-io
anchor by pre-importing the channel service via importlib.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

* Fix prettier formatting in provider-state test

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

* Reconcile UI runtime channel config with config reload on restart

Main now reloads a channel's config.yaml entry on restart_channel()
(#3514, issue #3497). Adapt the user-owned connection flow to coexist:

- configure_channel() restarts with reload_config=False — the caller
  just supplied the authoritative config (browser-entered credentials
  that are never written to config.yaml), so a file reload must not
  clobber it with the stale on-disk entry.
- _load_channel_config() re-applies the UI runtime-store overlay used
  at startup, so an operator-triggered restart keeps browser-entered
  credentials for channels without a config.yaml entry and does not
  resurrect a channel disconnected from the UI.
- Offload the reload's disk IO (config.yaml + runtime store) with
  asyncio.to_thread, matching the blocking-IO policy on this branch.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Fable 5 <noreply@anthropic.com>

backend/app/channels/wecom.py

@@ -8,8 +8,10 @@ from collections.abc import Awaitable, Callable
 from typing import Any, cast
 
 from app.channels.base import Channel
-from app.channels.commands import is_known_channel_command
+from app.channels.commands import extract_connect_code, is_known_channel_command
+from app.channels.connection_identity import attach_connection_identity
 from app.channels.message_bus import (
+    InboundMessage,
     InboundMessageType,
     MessageBus,
     OutboundMessage,
@@ -29,6 +31,7 @@ class WeComChannel(Channel):
         self._ws_frames: dict[str, dict[str, Any]] = {}
         self._ws_stream_ids: dict[str, str] = {}
         self._working_message = "Working on it..."
+        self._connection_repo = config.get("connection_repo")
 
     @property
     def supports_streaming(self) -> bool:
@@ -271,6 +274,16 @@ class WeComChannel(Channel):
 
         user_id = (body.get("from") or {}).get("userid")
 
+        connect_code = extract_connect_code(text)
+        if connect_code and self._connection_repo is not None:
+            handled = await self._bind_connection_from_connect_code(
+                frame=frame,
+                user_id=str(user_id or ""),
+                code=connect_code,
+            )
+            if handled:
+                return
+
         inbound_type = InboundMessageType.COMMAND if is_known_channel_command(text) else InboundMessageType.CHAT
         inbound = self._make_inbound(
             chat_id=user_id,  # keep user's conversation in memory
@@ -292,8 +305,52 @@ class WeComChannel(Channel):
         except Exception:
             pass
 
+        inbound = await self._attach_connection_identity(inbound)
         await self.bus.publish_inbound(inbound)
 
+    async def _attach_connection_identity(self, inbound: InboundMessage) -> InboundMessage:
+        return await attach_connection_identity(
+            inbound,
+            repo=self._connection_repo,
+            provider="wecom",
+            workspace_id=str(inbound.metadata.get("aibotid") or "") or None,
+            fallback_without_workspace=True,
+        )
+
+    async def _bind_connection_from_connect_code(self, *, frame: dict[str, Any], user_id: str, code: str) -> bool:
+        if self._connection_repo is None or not code:
+            return False
+
+        state = await self._connection_repo.consume_oauth_state(provider="wecom", state=code)
+        if state is None:
+            await self._send_connection_reply(frame, "WeCom connection code is invalid or expired.")
+            return True
+
+        if not user_id:
+            await self._send_connection_reply(frame, "WeCom connection could not be completed from this message.")
+            return True
+
+        body = frame.get("body", {}) or {}
+        workspace_id = str(body.get("aibotid") or "") or None
+        await self._connection_repo.upsert_connection(
+            owner_user_id=state["owner_user_id"],
+            provider="wecom",
+            external_account_id=user_id,
+            workspace_id=workspace_id,
+            metadata={
+                "aibotid": workspace_id,
+                "chattype": body.get("chattype"),
+            },
+            status="connected",
+        )
+        await self._send_connection_reply(frame, "WeCom connected to DeerFlow.")
+        return True
+
+    async def _send_connection_reply(self, frame: dict[str, Any], text: str) -> None:
+        if not self._ws_client:
+            return
+        await self._ws_client.reply(frame, {"msgtype": "text", "text": {"content": text}})
+
     async def _send_ws(self, msg: OutboundMessage, *, _max_retries: int = 3) -> None:
         if not self._ws_client:
             return